통합검색
검색

연구성과물 검색 타이틀 이미지

HOME ICON HOME > 연구과제 검색 > 연구과제 상세정보

연구과제 상세정보

핸드볼 페날티 드로우시 상지 분절의 역할
Three-Dimensional Kinematics of the Throwing Arm During the Penalty Throw in Handball
  • 한국연구재단 기초학문자료센터 DB구축사업 참여 관련분야 전문가가 추가 입력한 정보입니다.
사업명 자유공모과제
연구과제번호 1998-001-I00081
연구기간 1998-11-30~ 1999-11-29
연구책임자 임규찬(울산대학교)
연구수행기관 울산대학교
  • 결과등록초록
  • 본 연구는 핸드볼 페날티 드로우시 표적 위치(우상, 우하, 좌상, 좌하)에 따른 볼 속도에 대한 분절의 기여도, 분절의 각도와 각속도를 비교하고, 상지 분절의 역할을 규명하는 데 그 목적이 있다. 8명의 남자 핸드볼 엘리트 선수의 핸드볼 페날티 드로우 동작을 3차원 DLT 방식으로 영상 분석하여 분절의 기여도, 분절의 각도와 각속도를 분석한 결과 다음과 같은 핸드볼 페날티 드로우 동작의 패턴을 알 수 있었다. 즉, 핸드볼 페날티 드로우 동작은, 몸통의 최대 시계 회전각이 먼저 이루어진 후에 손의 최대 배측 굴곡이 이루어지고, 그 후에 전완의 최대 굴곡과 상완의 최대 수평 외전 자세가 이루어지며, 마지막으로 상완의 최대 외측 회전이 이루어진 후에 최대 외전 자세를 갖는 것으로 밝혀졌다. 또한 본 연구 대상자들의 전완의 신전 기여는 작으나 전완의 바루스 회전 기여가 상대적으로 크게 나타나 상완의 수평 내전과 전완의 바루스 회전에 의지하는 페날티 드로우 기술을 구사하는 것으로 나타났다.
    또한 표적에 따른 분절의 기여도, 분절의 각도와 각속도를 유의수준 0.05에서 변량 분석한 결과, 다음과 같은 결론을 얻었다.
    첫째, 핸드볼 페날티 드로우의 투사 순간 볼 속도에 대한 기여도는 몸통의 반시계 수직 회전 기여(28.4%), 손바닥 수직축에 대한 볼의 상대속도 기여(17.0%), 전완의 바루스 기여(16.1%), 손 횡축에 대한 볼의 상대속도 기여(16.0%), 상완의 수평 내전 기여(15.5%), 전완의 신전 기여(10.9%)의 순으로 나타났다. 표적에 따른 볼 속도 기여도 성분 중, 손에 대한 볼의 상대속도 성분에서만 유의한 차이가 나타났다.
    둘째, 핸드볼 페날티 드로우 동작에서 표적이 우상일 때 몸통의 최대 시계 회전각이 가장 컸고, 전완의 신전 각속도는 표적이 좌하일 때 가장 컸다. 그러나 그 외의 각도와 각속도에서는 유의한 차이가 나타나지 않았다.
    셋째, 핸드볼 페날티 드로우의 투사 순간에서 표적이 우하일 때 몸통의 전경각이 가장 컸고, 몸통의 반시계 회전각은 좌상일 때 가장 컸다. 그러나 그 외의 각도와 각속도에서는 유의한 차이가 나타나지 않았다.
  • 부초록(다른언어)
  • This study was conducted to investigate the differences in the instantaneous contributions of anatomical rotations of trunk, upper arm, forearm, and hand to ball speed among the targets based on the upper right corner, lower right corner, upper left corner, and lower left corner of handball goal post and to quantify the three-dimensional angular kinematics of the trunk and throwing arm during handball penalty throws motion by eight male subjects. The penalty throws were filmed using two video cameras, and data were collected through the DLT method of three dimensional cinematography. The mean and standard deviation of the contributions ratios and angular kinematic data being calculated, the data were verified using one-way ANOVA at level of significance .05 whether there were significant differences in the contributions ratios and angular kinematic data among the four targets. On the basis of the results analyzed, the conclusions were drawn as follows :
    In general, the address motion of handball penalty was carried out according to the sequence that the maximum clockwise twisting rotation of the trunk, the maximum dorsal flexion of the hand, the maximum flexion of the forearm, the maximum horizontal abduction of the upper arm, the maximum external rotation of the upper arm, and the maximum abduction of the upper arm came out.
    The largest contributors to predicted ball speed |(vB)'| at release were a counterclockwise twisting rotation of the trunk and a linear velocity of the ball relative to the right knuckle perpendicular to the plane of the hand. There were significant differences in the only x・y・z components of the linear velocity of the ball relative to the right knuckle among the four targets in the contributors to predicted ball speed at release. There were significant differences in the maximum clockwise twisting rotation angle of the trunk and the maximum extension angular velocity of the forearm in the address motion. There were significant differences in the front somersaulting angle of the trunk and the counterclockwise twisting rotation angle of the trunk at release.
  • 목차
  • Ⅰ. 서론
    1. 연구의 필요성 및 목적
    2. 연구 문제
    3. 연구의 제한점
    4. 용어의 정의
    Ⅱ. 이론적 배경
    Ⅲ. 연구 방법
    1. 피험자 선정
    2. 영상 분석 및 자료 산출 도구
    3. 실험 절차
    4. 자료 산출 방법
    5. 운동학적 변인의 계산
    6. 통계 처리
    Ⅳ. 결과 및 논의
    1. 투사 순간 볼 속도의 기여도
    2. 각도와 각속도의 최대값
    3. 투사 순간 각도와 각속도
    Ⅴ. 결론
  • 이 연구과제의 신청시 심사신청분야(최대 3순위까지 신청 가능)
  • 1순위 : 운동역학
  • 연구성과물 목록
데이터를 로딩중 입니다.
데이터 이용 만족도
자료이용후 의견
입력
트위터 페이스북
대전청사
(우34113) 대전광역시 유성구 가정로 201
Tel : 042-869-6114 / Fax : 042-869-6777
서울청사
(우06792) 서울특별시 서초구 헌릉로 25
Tel : 02-3460-5500 / Fax : 02-3460-5759
KRM 안내센터
Tel : 042-710-4360
E-mail : krmcenter@nrf.re.kr / Fax : 042-861-4380